If you're looking for A USB Oscilloscope that supports win10, click:
VDS1022 25MHz 2+1 Channel PC USB Oscilloscope, MIT USB Isolation
DESCRIPTION
DDS-140 is at the top of its class. It can be extended to achieve oscilloscope, signal generator and logic analyzer triple main functions by inserting different sub-modules. The highlighting advantages are the optional modular structure and high performance price ratio. When you do not want to spend a high price to buy a traditional oscilloscope, a signal generator and a logic analyzer .This product will be a good choice.
DDS-140 body take operation of traditional oscilloscope operation and part function of display transfer drawing into the computer by the software to achieve. As long as the DDS-140 device via USB cable into your compute, it will form a complete oscilloscope test system after running the software.
Hardware Features:
- Optional signal generator function
- Optional logic analyzer function
- Real-time sampling rate up to 200M hz
- Recommended input: 1 ~ 30M hz
- 10kV ESD protection
- 10 times over voltage protection
- DC-coupled and AC-coupled input
- Computer USB supply power directly
- 1K HZ square wave signal output
Software features:
- Support XP~Win8 series of operating system
- Waveform recording and continuous playback as well as specified frame playback functions by frame-by-frame
- Input channel arithmetic and FFT analysis
- Anti-aliasing features of waveform drawing to reduce rendering errors further
- Memory unction of user personalization settings
- The rapid completion of the mouse to control the trigger function settings
Application:
- Site engineer travel to debug
- AE engineers diagnose equipment and solve the problem for customer on-site
- Electronics Engineer develop tools, save money and desktop space
- The ideal partner of electronic enthusiasts for their amateur making
- Fault diagnosis equipment for repair personnel Demonstration Teaching Laboratory aids of colleges and Universities
- Automatic test equipment for production
Typical Characteristics:
Model |
Hantek6082BE |
Hantek6052BE |
Hantek6022BE |
||
Price |
$250 |
$190 |
$72 |
$100 |
$115 |
Channel |
2 Channels |
||||
Bandwidth |
80MHz |
50MHz |
20MHz |
20MHz |
40MHz |
Input Impedance |
1MΩ 25pF |
||||
Max. Sample rate |
250MSa/s |
150MSa/s |
48MSa/s |
50MSa/s |
200MSa/s |
Coupling |
AC/DC/GND |
||||
Vertical resolution |
8Bit |
8Bit |
8Bit |
||
Gain range |
10mV-5V, 9Steps |
±5V,±50V,±500V, |
±5V,±50V,±500V, |
||
DC accuracy |
±3% |
±3% |
±3% |
||
Timebase range |
4ns-1h, 38 Steps |
|
|
||
Vertical adjustable |
Yes |
||||
Input protection |
Diode clamping |
||||
X-Y |
Yes |
||||
EXT. input |
Yes |
No |
No |
No |
|
Trigger Mode |
Auto, Normal and Single |
||||
Trigger Slope |
+/- |
||||
Trigger level adjustable |
Yes |
||||
Trigger Type |
Rising edge, falling edge |
||||
Trigger Source |
CH1, CH2, EXT |
CH1, CH2 |
|||
Pre/Post trigger |
0-100% |
||||
Buffer size |
10K-64KB/Channel |
1M |
|
|
|
Sampling selection |
Yes |
||||
Waveform Display |
port/line, waveform average, persistence, intensity |
||||
Network |
Open/Close |
||||
Vertical mode |
CH1, CH2, Dual, ADD |
||||
Cursor measurement |
Yes |
||||
Math |
FFT, addition, subtraction, multiplication, division. |
||||
Cursor |
Frequency, Voltage |
||||
Accessories |
S/W CD, probes, manual, USB cord |
Signal Generator:
Signal generator module provides one BNC connector Signal output:
Entry |
Detail |
Waveform Type |
Square wave, sine wave, triangle wave, PWM |
Output amplitude |
Software adjustable output range-4V ~ +4 V |
Output frequency |
1 ~ 20M HZ (sine wave) continuously adjustable, PWM output frequency limit 20K HZ |
Output bandwidth |
5M HZ (Sine wave) |
Output Bias |
Software adjustable |
Duty |
Software adjustable PWM output duty cycle, 10% of the ladder |
Size |
10 cm X4 cm X2.5 cm |
WHAT'S IN THE PACKAGE
- 1x SainSmart DDS140
- 1x Signal Generator for DDS-140