Filter
Sort
-
SU05A, 1/4'' Shank, Single Flute, Spiral Upcut Cutter End Mill, 5 Pcs
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
Cost-Effective: Including 5pcs of the 1/4'' shank spiral upcut cutter, Shank Diameter: 1/4’’(6.35mm), Cutting Diameter: 6.35mm, Cutting Length: 12, 15, 17, 22, 25mm, Overall Length: 50mm.
Up-Cut Advantage: Upcut bits are preferable if you want to clear chips from your cuts to prevent overheating the bits. They are great for making cuts through the material. An up-cut is the most common type of cut.
Range of Processing: Used for Carving, Cutting, Slotting, Milling, Hollow Cutting in Materials Like Hardwood, Medium Density Board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
Wide Compatibility: Genmitsu SU05A spiral upcut cutter bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$44.99
-
SD03A, 1/4'' Shank & Cutting, 1-Flute, Spiral Downcut Cutter, 3-Pack
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles, and dados, plunge cut leaves with a clean edge and top surface, better than straight bits.
Cost-Effective: It comes with 3PCS of the single flute spiral down-cut bits with different cutting lengths and overall length to meet your requirements. Shank Diameter: 1/4''(6.35mm), Cutting Diameter: 1/4''(6.35mm), Cutting length: 12/17/22mm, Overall length: 50/60mm.
Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.
Wide Compatibility: The SD03A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$24.99
-
Sale
EM10B, 1/8" Shank, End Mill Set, for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood,10Pcs
Variety Pack: Including 3 different 1/8'' shank 4pcs single-flute end mills, 4pcs ball nose end mills and 2pcs 60° v-groove end mills.
Cost-effective: With 10pcs a set, it's cost-effective for the CNC makers. Come with a portable plastic case, each is stored in an individual section, the set is easy for storage and carries.
High Quality: Using tungsten carbide steel alloy, with good milling and cutting performance.
Wide Application: Great for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Compatibility: Genmitsu SN05A CNC router bits set are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$23.99
-
Sale
Sale
SR03A, 1/4'' Shank, Straight Plunge,Trimming Cutter, Double Flute Straight Bits, 3PCS
- High-quality: Made of Tungsten Carbide Steel Alloy. Made to last, super hard, wear, break, and corrosion-resistant.
- Nano Blue Coating: The hardness and heat resistance of the bits are enhanced with the Nano Blue Coating. It enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Shank Diameter: 1/4” (6.35mm); Cutting Diameter: 1.58mm, 3.175mm; Cutting Length: 8mm, 12mm
- Double flute straight bits are designed for trimming, three-dimensional clearance angle, slotted and wood screw holes.
- Wide Applications: Widely used to engrave on wood, MDF, particle boards, plywood, panels, softwood, and other synthetic wood.
$23.99$29.99
-
Sale
Sale
FT Series, 1/4'' Shank, Spiral Flush Trim Router Bit for Handheld Routing, 1Pc
There are two independent ball bearings at the tip ensure smooth running. Flush trim all types of material for a perfect finish. It is made of Tungsten Carbide Steel Alloy and designed with the Nano Blue Coating wear resistance. With the sufficient flexural strength and wear resistance which ensure high efficiency, also provides precise, efficient cuts and offers extreme durability.
It can be used with handheld, table-mounted and CNC routers. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. It can cut coves if used with an edge guide. Widely suitable for boring, milling, drilling, silk attack, sculpture, CNC, and other processing. Perfect for soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals.
$9.99$19.99