Filter
Sort
-
SN07A, 4mm Shank, 3-Flute, Square End Mill, for Aluminum Applications, 7 Pcs
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Cost-Effective: Coming with 7pcs of the 3-flute square end mills, Shank Diameter: 4mm, Cutting Diameter: 1/1.5/2/2.5/3/3.5/4mm, Cutting Length: 4/4/5/6/8/10/12mm, Overall Length: 50mm.
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal; Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.
Wide Compatibility: Genmitsu SN07A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$19.99
-
SN06A, 1/4’’ Shank, 3-Flute, 5 & 6mm Cutting, 6 Pcs End Mill for Aluminum Applications
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 6pc of the6x 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm&20mm, Overall Length: 50mm.
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal; Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.
Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$49.99
-
RB03A, 1/4'' Shank, 3-Flute, φ24mm Cutting Diameter, Spoilboard Surfacing, 3pcs Router Bits,
- High-quality Material: The sharp-tipped bits are made of tungsten carbide steel alloy that has excellent wear resistance and sharp edges.
- Shank diameter: 1/4''(6.35mm), cutting diameter: 1'' (25.4mm), cutting length: 7mm, overall length: 40mm, comes with 3pcs 1/2" to 1/4" router collet (Gift).
- Applicable Materials: Suitable for solid woods, MDF, laminate, particleboard, plywood compact panel, acrylic, etc and etc. Avoid cutting metal and non-wood materials.
- Perfect for Woodworking: The RB03A router bit is not only perfect for wood slab flattening, resurface, or plane the top surface of the spoil board, but also for trimming and slotting/grooving.
- Wide Application: Can be used on CNC routers and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines.
$19.99
-
Sale
Sale
FT Series, 1/4'' Shank, Spiral Flush Trim Router Bit for Handheld Routing, 1Pc
There are two independent ball bearings at the tip ensure smooth running. Flush trim all types of material for a perfect finish. It is made of Tungsten Carbide Steel Alloy and designed with the Nano Blue Coating wear resistance. With the sufficient flexural strength and wear resistance which ensure high efficiency, also provides precise, efficient cuts and offers extreme durability.
It can be used with handheld, table-mounted and CNC routers. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. It can cut coves if used with an edge guide. Widely suitable for boring, milling, drilling, silk attack, sculpture, CNC, and other processing. Perfect for soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals.
$9.99$19.99