[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS
[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS
- 101-61S-EM10A
- 101-61S-EM10A
- 101-61S-EM10A
- 101-61S-EM10A
Couldn't load pickup availability
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_01.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_02.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_03.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_04.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_05.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_06.jpg?v=1596728401&width=1445)
![[Discontinued] EM10A, 1/8" Shank, Micro-Cutting Diameter End Mills Bit Set, 10-PCS](http://www.sainsmart.com/cdn/shop/products/101-60B-003_07.jpg?v=1596728402&width=1445)
Genmitsu EM10A
10pcs Nano Blue Coat Tungsten Carbide Steel Alloy End Mill Set
- 4pcs Tapered Ball Nose End Mills: Radius: R0.25, R0.5, R0.75, R1.0mm; Cutting Length: 15mm
- 4pcs Single Flute Spiral End Mills: Cutting Diameter: 2, 2, 3.1, 3.1mm ; Cutting Length: 8, 8, 12, 22mm
- 2pcs Flat Bottom Tungsten Carbide Steel Alloy Engraving Bits: Cutting Diameter: 0.1, 0.2mm; Angle: 30°
- Material: Tungsten Carbide Steel Alloy
- Surface: Nano Blue Coating
- Shank Diameter: 3.175mm
- Overall Length: 38mm
Cost-Effective Set
Specially designed for ultra-fine carving projects, including 4x tapered ball nose end mills, 4x single flute spiral end mills, 2x flat bottom Tungsten Carbide Steel Alloy engraving bits. Shank Diameter: 3.175mm, Cutting diameter: 0.1 - 3.1mm (0.1, 0.2, 0.25, 0.5, 0.75, 1, 2, 3.1mm) , Overall Length: 38mm.
Wide Application
Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches. Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
High Quality
The end mills are made of ultra-fine 0.2μm tungsten steel that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
SPECIFICATIONS
- Material: Tungsten Carbide Steel Alloy
- Surface : Nano Blue Coating
- Shank Diameter: 3.175mm
- Overall Length: 38mm
4pcs Tapered Ball Nose End Mills:
- Radius: 0.25, 0.5, 0.75, 1.0mm
- Cutting Length: 15mm
4pcs Single Flute Spiral End Mills:
- Cutting Diameter: 2, 2, 3.1, 3.1mm
- Cutting Length: 8, 8, 12, 22mm
2pcs Flat Bottom Tungsten Carbide Steel Alloy Engraving Bits:
- Cutting Diameter: 0.1, 0.2mm
- Angle: 30°
What's in the package
- 1 x Tapered Ball Nose End Mill (Radius: 0.25mm, Cutting Length: 15mm)
- 1 x Tapered Ball Nose End Mill (Radius: 0.5mm,Cutting Length: 15mm)
- 1 x Tapered Ball Nose End Mill (Radius: 0.75mm,Cutting Length: 15mm)
- 1 x Tapered Ball Nose End Mill (Radius: 1.0mm,Cutting Length: 15mm)
- 2 x Single Flute Spiral End Mill (Cutting Diameter: 2mm, Cutting Length: 8mm)
- 1 x Single Flute Spiral End Mill (Cutting Diameter: 3.1mm, Cutting Length: 12mm)
- 1 x Single Flute Spiral End Mill (Cutting Diameter: 3.1mm, Cutting Length: 22mm)
- 1 x Flat Bottom Tungsten Carbide Steel Alloy Engraving Bit (Cutting Diameter: 0.1mm, Angle: 30°)
- 1 x Flat Bottom Tungsten Carbide Steel Alloy Engraving Bit (Cutting Diameter: 0.2mm, Angle: 30°)